Request a Quote
Tell us about your project and your needed specifications.
Fully-Enclosed, Built-for-You Instrument Air Systems
The air you need, the ease you deserve.
Plug & play
convenience
Save time
& money
Systems you
can rely on
Get Up and Running In No Time
We know you’re juggling budgets, equipment, and personnel. Our turn-key instrument air compression systems make it easy to connect to your site and get moving.
Outlast
Our field-tested systems are built to meet the rigors of oil field, natural gas, and heavy industrial applications.They’ll last the scope of this application and beyond.
Reduce Emissions
Meet industry regulations and reduce methane by switching from instrument gas to a quiet, clean system that’s fully insulated for both sound and climate control.
Simple Connect
Don’t waste time and money on a DIY system. Our turn-key packages come completely assembled and ready to connect.
Avoid Delays
Our agreements with industry leaders help you avoid lengthy supply-chain waits while also enjoying better pricing.
Manufacturing compressed air systems since 2007
10+ million cubic feet of methane emissions eliminated
50+ years experience in the oil and gas industry
A System For Every Project
Whether your operation is large or small, you’ll find an InstrumentAir™ Package that’s right for you.
InstrumentAir™ Packages
Built to your exact specifications, InstrumentAir™ standard and customized systems give you the features you want with the added benefit of our corporate buying power. Get the package you want in the timeframe you need, at a price that meets your budget.
AirCabinet™
- 1 – 3 CFM
- Clean, dry, -40°F PDP Air
- Pressure up to 120psi
- Power: Grid, Solar/Battery, or Grid/Solar/Battery Option
- Redundant or Lead-Lag Compressor Run
- Fully Enclosed and Climate Controlled
- Inlet Centrifugal Air Cleaning
- Minimal Maintenance
- Remote Monitoring and Alarms
AirBox™
- 5 – 80 CFM
- Clean, Dry, -40°F PDP Air
- Pressure up to 145psi
- Power: 115, 208/230, 480 VAC, or Non-Electric – runs on facility fuel or waste gas
- Redundant, Lead-Lag, or Simultaneous Compressor Run
- Fully Enclosed and Climate Controlled
- Inlet Centrifugal Air Cleaning
- Minimal Maintenance
- Remote Monitoring and Alarms
AirContainer™
- 80 – 200 CFM
- Clean, Dry, -40°F PDP Air
- Pressure up to 150psi
- Power: 480 VAC / 3 phase / 60 Hz
- Lead-Lag or Simultaneous Compressor Run
- Fully Enclosed and Climate Controlled
- Inlet Centrifugal Air Cleaning
- Minimal Maintenance
- Remote Monitoring and Alarms
Customize
- 1 – 500 CFM
- Clean, Dry, -40°F PDP Air
- Pressure up to 175psi
- Power and Non-Power Options Available (over 30 cfm requires grid power)
- Let us know your requirements and we’ll design/build a practical and cost-effective solution
Learn More
Explore what our InstrumentAir™ Packages have to offer.
AirCabinet™
- Turnkey – ready to set
- 1 – 3 CFM at 100psi
- Oil-free air compressors
- Pressure up to 120psi
- Site power required: 20 Amp – 120VAC / 1 phase / 60 Hz
- System power: 24 VDC
- Coalescing filter with timed drain and integral DP sensor upstream of dryer
- Zero loss desiccant canister dryer
- 60 gallon receiver tank
- Control panel
- compressor run sequence through PLC – redundant or lead-lag
- redundant controls
- switches
- compressor running light and runtime displays
- system transmitters and alarms for remote monitoring
- Secure steel enclosure houses all components – insulated and climate controlled with heater and exhaust
- Inlet centrifugal precleaning and positive pressure blower – pulls clean air into the enclosure and drops out dirt/dust/particulate outside enclosure
- Optional external emergency air receiver
AirCabinet™ Solar/Battery
- Turnkey – ready to set
- 1 – 3 CFM at 100psi
- Oil-free air compressors
- Pressure up to 120psi
- Site power required: no site power required
- System power: 24 VDC
- Coalescing filter with timed drain and integral DP sensor upstream of dryer
- Zero loss desiccant canister dryer
- 60 gallon receiver tank
- Control panel
- compressor run sequence through PLC – redundant or lead-lag
- redundant controls
- switches
- compressor running light and runtime displays
- system transmitters and alarms for remote monitoring
- Secure steel enclosure houses all components
- Heat traced
- Inlet centrifugal precleaning and positive pressure blower – pulls clean air into the enclosure and drops out dirt/dust/particulate outside enclosure
- 450 Watt, 24V solar panels
- Batteries (6V or 12V) – spec’d to meet run and autonomy requirements
- Optional external emergency air receiver
- Grid/Solar/Battery Option – batteries charge on grid power and switch to solar if power is lost – Option requires 20 Amp at 120 VAC / 1 phase / 60 Hz
AirBox™
- Turnkey – ready to set
- 5 – 60 CFM at 100psi
- Rotary Vane, Rotary Screw, Reciprocating, or Oil-Free Air Compressors
- Pressure up to 145psi
- Site power required: 115, 208/230, 480 VAC
- System power: 115, 208/230, 480 VAC
- Coalescing filter with timed drain and integral DP sensor upstream of dryer
- Particulate after-filter
- Regenerative desiccant air dryer
- 60 gallon wet tank
- Multiple dry tank size options
- Control panel
- compressor run sequence through PLC – redundant, lead-lag, or simultaneous
- redundant controls
- switches
- starter with latching overload relay
- compressor running light and runtime displays
- system transmitters and alarms for remote monitoring
- Secure steel enclosure houses all components (except external dry tank) – insulated and climate controlled with heater and exhaust
- Inlet centrifugal precleaning and positive pressure blowers – pulls clean air into the enclosure and drops out dirt/dust/particulate outside enclosure
- Optional external emergency air receiver
AirBox™ - Non-Electric (no site power required)
- Turnkey – ready to set
- 5 – 30 CFM at 100psi
- Reciprocating air compressor
- Compressor engine fueled by fuel gas, waste gas, propane, gasoline, or other recovered gas
- Pressure up to 145psi
- Site power required: no site power required
- System power: 24 VDC
- Coalescing filter with timed drain and integral DP sensor upstream of dryer
- Particulate after-filter
- Regenerative desiccant air dryer
- 60 gallon wet tank
- Multiple dry tank size options
- Control panel
- compressor run sequence through PLC – redundant, lead-lag, or simultaneous
- redundant controls
- switches
- starter with latching overload relay
- compressor running light and runtime displays
- system transmitters and alarms for remote monitoring
- Secure steel enclosure houses all components (except external dry tank) – insulated and climate controlled with heater and exhaust
- Inlet centrifugal precleaning and positive pressure blowers – pulls clean air into the enclosure and drops out dirt/dust/particulate outside enclosure
- Optional external emergency air receiver
AirContainer™
- Turnkey – ready to set
- 70 – 200 CFM
- Rotary Screw Air Compressors
- Pressure up to 150psi
- Site power required: 480VAC / 3 phase / 60 Hz
- Coalescing pre-filters and particulate after-filters
- Integral differential pressure gauges and 3 valve by-pass
- Regenerative air dryer
- 240 gallon “Wet” and 240 gallon “Dry”
- Multiple external dry tank size options
- Control panel
- compressor run sequence through PLC – redundant, lead-lag, or simultaneous
- redundant controls
- switches
- starter with latching overload relay
- compressor running light and runtime displays
- system transmitters and alarms for remote monitoring
- Secure modified steel cargo container houses all components – insulated and climate controlled with heater and exhaust
- Optional external emergency air receiver
Get Started Today
Need help choosing the best package for your project?
Give us a call at 970-375-1200
Visit Us
456 Wolverine Drive,
Bayfield, CO 81122