InstrumentAir™ Packages

AirCabinet™

Provides clean, dry, -40°F PDP compressed air
  • Compact Electric Air Compressor
  • Flow rates: 0.76 – 1.2 CFM
  • Pressures up to 145 psi
  • 12 or 24 VDC
  • Designed for outdoor installation
  • Wall, post or pipe mounted

AirBox™

Provides clean, dry, -40°F PDP compressed air
  • Flow rates: 5-23 CFM
  • Pressures up to 145 psi
  • 115, 208/230, and 480 VAC electric service
  • Single or dual, 100% duty-cycle rotary vane compressors
  • Skid includes: receiver, filter, dryer, drains and controls
  • Climate controlled and insulated for sound and temperature
  • Zero-loss desiccant canister or regenerative desiccant air dryer

AirContainer™

Provides clean, dry, -40°F PDP compressed air
  • Flow rates: 20-200 CFM
  • Pressure: up to 150 psi
  • 480 VAC electric service
  • Dual rotary screw compressors
  • Skid includes: receivers, dryer & filtration system, redundant compressors, drains and controls
  • Heatless regenerative dryer
  • Climate controlled and insulated for sound and temperature
  • Heavy-duty steel enclosure
  • Easily portable

Customize

Provides clean, dry, -40°F PDP compressed air
  • Flow rates: 0.25-500 SCFM
  • Pressure: up to 175 psi
  • Power and Non-Power options available
  • Let us know your requirements and we’ll design a practical and cost-effective solution

Are You Concerned With?

  • Reliability and sustainability
  • Environmental Impact
  • Fugitive/uncontrolled emissions
  • Operational Safety
  • Replacing outdated instrument gas system
  • Meeting state and federal requirements

At Tegre, our InstrumentAir™ Packages Are:

Field Proven

Designed for the rigors of oil field, natural gas, and heavy industrial applications.

Completely Self-Contained, Ready to Set, Connect, and Run

Built to customer specifications, InstrumentAir™ systems include air compressors, filtration, air storage, air dryer, drain accessories and temperature control.

Reliable, Clean, and Quiet Operation

AirContainers™ and AirBoxes™ are fully insulated for both sound and climate control. You can conveniently, quietly, and efficiently meet your emission reduction goals and power up your site with clean, dry InstrumentAir™.

Setting the Standard for Turnkey InstrumentAir

Reducing emissions, increased reliability, optimal performance, and low maintenance are critical for our clients.

We care about your asset as much as you do.
Your success is our success.

Experienced in manufacturing high quality, highly reliable InstrumentAir™ packages since 2007
Tens of millions of cubic feet of methane emissions eliminated
With more than 50 years of experience manufacturing, installing, and maintaining systems throughout the US and in the harshest of environments

AirCabinet™

  • Compact, portable packages designed for air volumes up to 1.2 SCFM at pressures up to 145 psi in remote locations where solar power or external DC power can be used
  • Incorporate air dryers to provide dew points as low as -40°F
  • Portable and shippable to locations world-wide
  • Designed and field tested for reliable operation in extreme temperatures from -20° to +105°F
  • Compressors are available in 12 VDC and 24 VDC models
  • Packaged InstrumentAir systems are delivered complete and ready to assemble to your post mount, wall mount, or other surfaces

AirBox™

  • Self-contained turnkey InstrumentAir™
  • Compact, portable packages designed for air volumes up to 10 SCFM at pressures up to 145 psi in many industrial and remote location applications
  • Incorporate air dryers to provide dew points as low as -40°F
  • Ideal for your utility air and power air requirements
  • Single or dual, 100% duty-cycle rotary vane industrial air compressor(s)
  • Electric and non-electric options
  • Portable and shippable to locations world-wide, they are delivered complete and ready to connect
  • Designed and field tested for reliable operation in extreme temperatures from -20° to +105°F.

AirBox™ - Non-Electric

  • Self-contained turnkey InstrumentAir™
  • Compact, portable packages designed for air volumes up to 23 SCFM at pressures up to 145 psi in many industrial and remote location applications
  • Incorporate air dryers to provide dew points as low as -40°F
  • Compressor engine fueled by methane/natural gas, propane, gasoline, waste gas, flare, or other recovered gas
  • Portable and shippable to locations world-wide, they are delivered complete and ready to connect
  • Designed and field tested for reliable operation in extreme temperatures from -20° to +105°F.

AirContainer™

  • Self-contained turnkey InstrumentAir™
  • Deliver large compressed air volumes up to 200 CFM at pressures up to 150 psi in most industrial and remote locations
  • High pressure systems are also available exceeding 250 psi
  • Incorporate single or dual dryers matched to the compressors’ capacities to provide dew points as low as -40°F
  • Dual rotary screw compressors
  • Portable and shippable to locations world-wide, these packaged Instrument air systems are delivered complete and ready to connect
  • Designed and field tested for reliable operation in extreme temperatures from -20° to +105°F.
  • Use these in your facilities as stand-alone systems or expand your existing plant instrument air or utility air systems.

Additional Products

  • Emergency Air Controller
  • Maintenance kits for AirCabinet/Box/Container – complete system kits for all compressors, filters, and dryers. Kits are customized for your package
  • Dessicant dryer package

Additional Customized Services

  • Coalescing and Particulate Gas Filters
  • Instrument Air/Gas Filtration
  • Process Liquid Filtration
  • Strainers – basket, witches hat, etc
  • Water Filtration
  • Cooling Tower Filtration
  • Sand Filters and Multi-Media Filters
  • Activated Carbon Adsorption
  • Liquid/Liquid Separation
  • Lube oil filtration
  • Industrial water filtration
  • Combustion Air Filtration
  • Piping specialties: Vents, Drains, Valves, Checks Sight Flow Indicators, Pressure control, and more…
  • Steam Control: Traps, Condensate Management, Sampling
  • Check valves and Control Valves
  • High Pressure Level Gauges
  • Tubular Sight Glasses
  • Condensate Level Indication and Control
  • Vessel Level Control and Dump Systems
  • Fluid Control and Check Valves
  • High Pressure Level Gauges
  • Condensate Level Indication and Control
  • Pressure Relief Valves
  • Blowdown Valves
  • Pressure Reducing Valves
  • Liquid Level Visual, Transmitters, switches
  • Level Gauges
  • Pressure & Temperature Controls
  • Control Valves
  • Solenoid Valves
  • Condensate Return Pumps
    • PSD Pressure Motive Pump
  • Product/Manufacturer Search
  • Procurement Services
    • Instruments
    • Filters
    • Desiccant Dryers
    • Instrument Air/Gas Dryers
  • Inventory Contol and Consultation

Get Started

Get the results you rely on with Tegre InstrumentAir™

1

Alignment

We work with you to determine the best package for your asset.

2

Solutions

We get to work on your order keeping you informed along the way, giving you confidence we’ll meet your schedule.

3

Results

Get the package you expected.